Oxygen Generators

Tech Verticals introduces the Cast Iron Oxygen Generator, which provides a continuous flow of oxygen that is produced to a 95% level on-site, for industrials looking for a secure and independent source of gas.

One-of-a-kind Pressure Swing Adsorption technology is used in our Cast Iron Oxygen Generators. These generators, as opposed to twin-tower typical systems, have several molecular sieve modules that each applies an improved patented PSA process.

Without the need for specialised employees, the manufacturing capacity can be simply changed directly on-site by adding a few simple modules. Its tiny size allows for installations even in production facilities with low ceilings or small spaces. As Cast Iron Oxygen Generator Supplier our models share the same parts, making spare parts management simple and maintenance quick.

Tech Verticals, an Automatic Oxygen Generator Supplier, provides oxygen generators for all industrial applications and flow requirements. Locally produced oxygen is always produced from ambient air. This safe, secure, and ecologically responsible means of avoiding ongoing gas supply is also inexpensive. It is not necessary to store a lot of oxygen.

Tech Verticals also pays particular attention to the energy efficiency of their equipment, which thanks to a PSA process that has been refined, provides remarkable compressed air-to-oxygen ratios. Because Tech Verticals was a founder in the development and manufacturing of Automatic Oxygen Generator, it can meet even the most demanding industrial requirements.

200M PSA OXYGEN GENERATOR

OXYGEN OUTPUT FLOW AT

26.20 NM3/HR,

437 LITERS PER MINUTE,

97 EQUIVALENT D TYPE JAMBO CYLINDERS PER DAY AT 5.5 BAR AND 93 +-3% PURITY

30 KW KAESER COMPRESSOR

FOLLOW EUROPIAN PHARMACOPIA

300M PSA OXYGEN GENERATOR

OXYGEN OUTPUT FLOW AT

36.50 NM3/HR,

4608LITERS PER MINUTE,

135 EQUIVALENT D TYPE JAMBO CYLINDERS PER DAY AT 5.5 BAR AND 93 +-3% PURITY

37 KW KAESER COMPRESSOR

FOLLOW EUROPIAN PHARMACOPIA

The pressure swing adsorption technique is used by Tech Verticals' PSA Oxygen Generator to remove oxygen (O2) from the compressed gas. Compressed air is circulated through a substrate of zeolite molecular sieve, which contains around 21% oxygen and 78% nitrogen (ZMS). The sieve allows the O2 to flow through as a product gas under pressure because it selectively diffuses N2 and moisture over O2.

The cycle is then resumed as the other tower regenerates by depressurizing while the other tower is in the adsorption phase. At this point, the sieve discharges the gases that were adsorbed to the environment. We, as a PSA Oxygen Generator Supplier, provide extremely dependable PSA oxygen generators depending on our in-depth technical expertise and production capabilities.

We at Tech Verticals are proud to be able to provide our respected customers with premium portable oxygen generators. The Portable Oxygen Generator is the first lightweight oxygen concentrator that offers three different operating modes: continuous flow, pulse dose delivery, and sleep.

When treating patients with continuous flow oxygen, it can provide up to 2 litres per minute, or up to 6 boluses per minute when treating patients with pulse dose oxygen.

We as a Portable Oxygen Generator Exporter, have an oxygen output that is more than twice as high as portable oxygen concentrators weighing 5kg or less. The machine produces a lot of oxygen to meet the needs of every patient. We're renowned for our dependability. The machine has huge cartwheels, high-quality components, a long-lasting compressor, and impact-resistant construction.

We at Tech Verticals manufacture gaseous oxygen on-site using compressed air, providing a more affordable, dependable, and secure option to conventional oxygen gas suppliers like cylinders or cryogenic liquid.

Our design is intended for nonstop, 24-hour operation. As a Medical Oxygen Generator Exporter, our generators have an automatic start/stop capability that enables them to start and stop the following usage. Our Medical Oxygen Generator uses a zeolite molecular sieve as an adsorbent and air as the input material. It operates at low pressure and normal temperature while selectively adsorbing oxygen.

It is 93% pure plus 3%. In addition to the already available oxygen generators, we are also able to design the oxygen generator system to the installation circumstances at the customer site and install it there for clients.

Oxygen generators from Tech Verticals as an Oxygen Generator Exporter are available for all industrial applications and flow requirements. Every time, oxygen is created locally from the outside air. This environmentally friendly method of avoiding constant gas supplies is also cost-effective and secure. Large-scale oxygen storage is not required.

Tech Verticals as an Oxygen Generator Supplier also pays close attention to the energy economy of its machinery, which produces outstanding compressed air-to-oxygen ratios as a result of a PSA process that has been perfected. Tech Verticals can satisfy even the most stringent industrial demands because it was a pioneer in the design and production of on-site oxygen generators. The most effective and cost-effective way to have an endless supply of oxygen on hand is using this method.

The reliable and affordable method to reach O2 purity levels of 90% to 99% is to use a tough, and reliable oxygen generator from Tech Verticals. Tech Verticals' Industrial Oxygen Generator is built to precisely match the purity, pressure, and flow needs of each customer for a fraction of the price of delivered gas.

We are a global innovator in technology for supplying Industrial Oxygen Generators. We as an Industrial Oxygen Generator Supplier, provide an oxygen generation solution with a quick return on investment and predictable expenses year after year. Even specially designed oxygen-generating systems are not necessarily out of reach. Our designed oxygen systems offer a quick payback period of around 12 to 18 months.

90M PSA Oxygen Generator.

Output pressure is 5.5 bar.

11 KW Kaeser Compressor.

93+-3% purity.

Follow European pharmacopeia

A zeolite molecular sieve is placed in each of the two columns of the VSA oxygen generator from Tech Verticals as a VSA oxygen generator supplier. After being cleaned, compressed air reaches the active column and climbs up via the zeolite. Oxygen and other unwelcome gases are absorbed as the nitrogen passes through.

At that time, the VSA Oxygen Generator has an active column that reached its maximum pressure. When this pressure is released, the column ceases to operate, and during the depressurization it completely regenerates. Two columns make up each generator, one of which is in use while the other is dormant. This guarantees a steady flow of oxygen. After each cycle of columns, they switch positions.

The VPSA Oxygen Generator from Tech Verticals as a VPSA Oxygen Generator Supplier comprises two columns that are each filled with a zeolite molecular sieve. Compressed air that has already been cleaned enters the active column and ascends via the zeolite. While the nitrogen flows through, oxygen and other undesirable gases are absorbed.

At that point, the active column in the VPSA Oxygen Generator is fully pressured. The column stops functioning when this pressure is released, and it regenerates throughout the depressurization. Each generator is made up of two columns, one of which is active while the other is inert. This ensures a constant supply of oxygen. They trade places after each cycle of columns.

The other vessel is renewing as a result of a decrease in pressure while pressure is growing in the first. This procedure ensures a constant flow.